Re: Fuel guage sending unit resistance/ignition box

[Bob Crockett <bcrockett1492@xxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caadOuabOyW3Na/PC PowerScan
-------------------------------------------------------------------

--- Jim500mopar wrote:

> > >Problem is 
> > > that a full load of 111 octane juice doesn't even
> > > make the original guage on dash 
> > > move, altough it might have moved up just the
> > > slightest bit.  I suspect Jaz 
> > > installed a (gasp) GM sending unit on the cell. 
> > > Does anyone know what the 
> > > correct number of ohms I should read across the
> > > sender? 

I think you are correct about the wrong sender, but even with that, you 
should show some fuel.  Is your sender grounded???

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Click 
here to get your 30-day free supply.
caadOvHbOyW3Nf/Nexiderm
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


bOyW3N.