RE: rear suspension

[Jim Jablonski <jim@xxxxxxxxxxxxx>]

What do you mean the perches are at a different angle (?)

Also, If you are installing the spring relocation kit, you don't use 
front spring hangers ... the large bolt goes through the spring eye and 
the new "box" that is welded into the frame.

What am I missing?

Jim Jablonski
Royal Oak, Michigan
'64 Fury

moparbikeguy@xxxxxxx wrote:
> 
> 
>  I removed all of the rear suspension and the entire third member today 
>  in preparation for putting the springs into the frame rails of my '65 
>  Coronet. I have the superstock springs that are now manufactured in 
>  Mexico. I noticed when I installed them earlier this year and again upon 
>  removing them today, that the perches are at slightly different angles. 
>  The housing perches are exactly the same. I have been using the 
>  superstock front spring hangars also. Is this the way they are supposed 
>  to be? It seems that the housing would be under a constant twisting. The 
>  springs have the right numbers. I got them through Mancini along with 
>  the hangars.
>  
> '65 Coronet 500 stroker
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@