RE: Poly head cut

[Dan Watts <dan.watts@xxxxxxxxxxx>]

Don,
Other ideas, first, thinking about it, I don't think waterjet will work
because of the changing thickness's of the cross section being cut.
However, if you're thinking a "straight" slice, it could be accomplished
with a wire EDM Machine.  They're now available for longer deeper cuts, you
would lose around .010 to .015 in total thickness with a minimum of recast
layer.  Also, you mentioned that you had a supply of heads, could you just
mill two sets of heads (four total), to yield the one set of split matched
heads.  The possible problem with this is if coring internally does not
match up head to head.
Dan Watts
 

-----Original Message-----
From: Don Dulmage [mailto:big-d@xxxxxxxxxxxx] 
Sent: Wednesday, November 01, 2006 5:26 AM
To: 1962to1965mopars@
Subject: Poly head cut



A couple of you told me a water jet will do the job. We have a water jet
facilty near here that does custom work. I will talk to them next time i am
in Trenton and mabe take a head with me just in case. Thanks for al the
input. Don
Author of
Return to Deutschland (True Adventure)
Old Reliable (Mopar)
http://stores.ebay.ca/Don-Dulmage-Enterprises
http://seniordragster.bravehost.com/index.html
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@