RE: paint prep
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: paint prep



Make sure to use a primer and paint that is compatible with the old 
paint underneath.Seen a couple of jobs where the new age paints dont 
stick too well to sanded down old paint.

Bob

Earl Helm wrote:
> 
> Well we agree to disagree about the media blasting... No issues 
> with paint today being better than todays paint, but the older 
> single stage paints that are in good shape are great bases for 
> a new paint job if a guy is trying to save some time and money.
> 
> Earl
> 
> 
>  People have been media blasting for years with no adverse effects on the
> final finish.Of coarse anyone that's in the industry know, the bare 
> surface
> needs to be a braided(sanded) for proper adhesion.
>  Secondly todays paint products are far and away much better then what 
>  the
> factory was using back when our cars where first built.
> --- "Earl H. " <earlh@xxxxxxxxxxxxxx> wrote:
> 
> > 
> > My recommendation is not to blast period. What happens is, no matter 
> > what media you use, some of it will remain in the microscopic pits of 
> > the metal. This will cause issues later after painting.
> > If you want a paint job to last as long as the original, don't blast.
> > 
> > If the original paint is good, and you do not discover any unexpected 
> > past repairs while prepping for the new paint, just sand the original 
> > paint and paint over it. You can do a test on the existing paint to 
> > make sure the new paint, primer, and cutting agent is not going to 
> > react with the original paint. If it does not, then leaving the 
> > original paint on is the way to go. I am assuming it has not been 
> > repainted. If this is the second paint job on the car, I would 
> > recommend a chemical strip.
> > This is not that hard to do, but yields far better results. This can 
> > be done by hand. I would recommend removing all the glass when doing 
> > the new paint job.
> > 
> > Earl
> > 
> > 
> > 
> > -----Original Message-----
> > From: Bob Fortson [mailto:bobt1885@xxxxxxxxx]
> > Sent: Wednesday, November 01, 2006 10:49 AM
> > To: 1962to1965mopars@
> > Subject: Re: paint prep
> > 
> > 
> > Don't sand blast! Stretches the metal they say. I don't know about the 
> > prices, but ...................
> > 
> > Bob Fortson
> > 
> > --- bigroberta@xxxxxxx wrote:
> > 
> > > 
> > > 
> > > Hi all,
> > >  
> > > I am  getting ready to strip and repaint my car. 
> > > Any thoughts on sandblasting, media blasting
> > >  
> > > or soda blasting. I just came back from a shop
> > that does soda blasting
> > > and this seems like the way to
> > >  
> > > go.  My car doest have any heavy rust.  The guy
> > wants $ 1400 to do
> > > everything here in MD.
> > >  
> > >  
> > >  I plan on taking everything off except what is
> > needed to roll the car. 
> > > He says " the soda will not
> > >  
> > > hurt anything." 
> > >  
> > > Robert
> > > 63 spt fury conv.
> > >  
> > >  
> > >  
> > >  
> > >  
> > >  
> > > ROBERT GILLIS...
> > >
> >
> ________________________________________________________________________
> > > Check out the new AOL.  Most comprehensive set of
> > free safety and
> > > security tools, free access to millions of
> > high-quality videos from
> > > across the web, free AOL Mail and more.
> > > 
> > > [Non-text portions of this message have been
> > removed]
> > > 
> > > 
> > > ----
> > > Please address private mail -- mail of interest to
> > only one person --
> > > directly to that person.  I.e., send parts/car
> > transactions and
> > > negotiations as well as other personal messages
> > only to the intended
> > > recipient, not to the Clubhouse public address.
> > This practice will
> > > protect your privacy, reduce the total volume of
> > mail and fine tune
> > > the content signal to Mopar topic.  Thanks!
> > > 
> > > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > >
> > http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> > >
> > > 
> > > 
> > > 
> > 
> > 
> > 
> >  
> >
> ____________________________________________________________________________
> 
> > ________
> > Get your email and see which of your friends are online - Right on the 
> > New Yahoo.com
> > (http://www.yahoo.com/preview)
> > 
> > 
> > ----
> > Please address private mail -- mail of interest to only one person -- 
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will 
> > protect your privacy, reduce the total volume of mail and fine tune 
> > the content signal to Mopar topic.  Thanks!
> > 
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> > 
> > 
> > ----
> > Please address private mail -- mail of interest to only one person -- 
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will 
> > protect your privacy, reduce the total volume of mail and fine tune 
> > the content signal to Mopar topic.  Thanks!
> > 
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> >
> > 
> > 
> > 
> > 
> > 
> 
> 
> Dean Miller
> 
> 
> 
>  
> ____________________________________________________________________________
> 
> ________
> Low, Low, Low Rates! Check out Yahoo! Messenger's cheap PC-to-Phone call
> rates
> (http://voice.yahoo.com)
> 
> 
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and 
> negotiations
> as well as other personal messages only to the intended recipient, not 
> to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to 
> Mopar
> topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@







Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.