RE: Turn Signal/Horn Wire Harness Removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Turn Signal/Horn Wire Harness Removal



Thanks for the correction Kevin. It
s been several yrs. since I replaced mine and I've
forgotten a bit.
--- Kevin Merkley <krmerkley@xxxxxxxxx> wrote:

> 
> Hi,
> 
> I want to add another step.
> 
> Once you have disconnected the wiring connectors
> from the plastic plug, 
> tape a piece of string to one of the wires.  When
> you pull the wires 
> out, the string will follow and you can tape the new
> wires to the string 
> and pull them down the column instead of pushing the
> wires down and 
> groping for them at the opening where they are to
> meet the body wiring.
> 
> Have fun.
> 
> K.
> 
> 
> HoustonDB@xxxxxxx wrote:
> > 
> > 
> > You have to remove the terminals from the plastic
> connector at the end 
> > of  
> > the harness.  
> >  
> > Make a little sketch to show which color wire goes
> to the different  
> > positions in the plastic connector.  Release the
> terminals from the 
> > plastic  connector 
> > and then slowly pull the turn signal cam and
> wiring out of the  steering 
> > 
> > column.  If you skip down about halfway on the
> page in the link  below, 
> > it has a 
> > picture and a little information about removing
> the plastic  connector.
> >  
> >
>
_http://www.1962to1965mopar.ornocar.org/ml-houstons-steeringcoupler.html_
> 
> > 
> >
>
(http://www.1962to1965mopar.ornocar.org/ml-houstons-steeringcoupler.html)
> 
> > 
> >  
> > Hope that helps.....
> >  
> > Houston
> > '64 Belvedere
> > 
> > [Non-text portions of this message have been
> removed]
> > 
> 
> 
> 
> Kevin R. Merkley
> Thunder Bay, Ontario
> 64 Dodge 440 2dr HT (Cdn)
> 
> 
> ----
> Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e.,
> send parts/car transactions and negotiations as well
> as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This
> practice will protect your privacy, reduce the total
> volume of mail and fine tune the content signal to
> Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
> 
> 


George


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

. 



http://www/?p=




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.