Re: crossram

[William Cole <wedge64@xxxxxxxxxxx>]

Yes, just put clear silicone on the ends of the block. I used 440 6 pack
gaskets on mine for the sides. If you use a allen head socket to install
the bolts, make sure you tape it to the extension and don't do what I
did the first time I installed my intake and had the socket fall off
inside the intake. I had to take the intake back off to find the socket.
I even use a little grease on the end of the allen socket to help hold
the bolt on while I find the hole to install the bolt.

Bill C.
On Sun, 25 Feb 2007 07:36:14 -0800, "harry skalla"
<moweepea@xxxxxxxxxxx> said:
> 
> Clear DayHello, I have a question on my crossram. I'm getting ready to
> put 
> it on, and it has been a long time since I did this. If I remember right
> the 
> only gasket you use is the one mating the intake to the heads. On the
> block 
> in back and front of the  crossram you put a generous amount of sealant,
> and 
> put the intake on. Does that sound right? I just don't want to have to
> take 
> it off after I get it on, because I forgot to do something right. Thanks, 
> Harry
> 
> 
> 
>                  64 Dodge 440
> 
> 
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will
> protect your privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
> 
-- 
  William Cole
  wedge64@xxxxxxxxxxx

-- 
http://www.fastmail.fm - One of many happy users:
  http://www.fastmail.fm/docs/quotes.html


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.