Re: radiator flex hose

[george smith <bt6t4@xxxxxxxxx>]

One downside is with some age or too much pressure in
the curve it must endure is the wire inside popping
through the hose and leaking. That I have seen as well
as when it gets old.
--- Dave Casey <dcasey@xxxxxxxxxxxxx> wrote:

> 
> I'm running them on my '65 Polara because of the
> radiator upgrade I did to 
> it. The hoses have held up fine, and the cooling
> system has no problems, so 
> I don't see anything wrong with them.
> I would prefer to have molded hoses on there as I
> think they look better, 
> but I haven't gotten around to it. Too much downtime
> for not enough of a 
> good reason. There's a book (Tex Smith?) about
> plumbing and hardware on race 
> cars, and it advises against the universal hoses,
> but I can't remember what 
> the reasons were. For custom applications, your
> alternative is to go behind 
> the counter at the auto parts store where they've
> got them all hanging up 
> and try all the hoses that look like they might fit
> (which is what the book 
> suggests).
> 
> Dave Casey
> 
> ----- Original Message ----- 
> From: "Sean B" <polecat2@xxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Sunday, March 25, 2007 6:19 PM
> Subject: radiator flex hose
> 
> 
> >
> > Are there any disadvantages in using those cheap,
> rubber radiator flex
> > hoses?  Do they restrict flow, or make the coolant
> foam, etc.?
> >
> >
> > ----
> > Please address private mail -- mail of interest to
> only one person --  
> > directly to that person.  I.e., send parts/car
> transactions and 
> > negotiations as well as other personal messages
> only to the intended 
> > recipient, not to the Clubhouse public address.
> This practice will protect 
> > your privacy, reduce the total volume of mail and
> fine tune the content 
> > signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> >
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> >
> > 
> 
> 
> ----
> Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e.,
> send parts/car transactions and negotiations as well
> as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This
> practice will protect your privacy, reduce the total
> volume of mail and fine tune the content signal to
> Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
> 
> 
> 
> 


George



 
____________________________________________________________________________________
The fish are biting. 
Get more visitors on your site using Yahoo! Search Marketing.
http://searchmarketing.yahoo.com/arp/sponsoredsearch_v2.php


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.