Re: Cable Shift trans vs Later Model Installation Question

["Don H." <mopar4me@xxxxxxxxxxx>]

IIRC I had to do a little modification on a crossmember when I put a 66-up 
727 behind the original poly.  I don't recall whether it was the original 65 
Coronet or a later crossmember or really remember the mod.  Still have the 
crossmember.
Don.
----- Original Message ----- 
From: "Nico Over" <nover@xxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, April 24, 2007 6:15 PM
Subject: Cable Shift trans vs Later Model Installation Question


> Does anyone know if the 66 up 727 requires trans mount/cross member
> fabrication when installed in a 62-65 B body (stock K member). Or 
> basically
> what problems would I have doing this, not to include linkage as I have a
> later column installed and would use a floor shifter. Thanks in advance.
> Nico Over
> Va. beach, Va.
> 64 Sport Fury
> 63 Dodge 440 wagon
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.