Re: No Timing Mark?!?!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: No Timing Mark?!?!



Yup, it's a stock damper. I'm gonna tear all the accessories off the
front of the motor this weekend and go over it w/ a fine tooth comb.
If I can't find it, I guess I'll be buying a dial indicator. I
personally have NEVER seen a stock damper w/o a mark...anyone else?

Bill M
65 Coronet 500 'vert

On 5/3/07, Richard Kinsley <r.kinsley@xxxxxxxxxxxxxxxx> wrote:


Bill Maurits wrote:
>
> NOTHING...from what I can tell, it's completely smooth. I spent ~15
> mins bumping the engine and staring @ this thing w/ a high power
> light...i can't see any kind of mark @ all.
>
> Bill M
> 65 Coronet 500 'vert
=====================================================================

Is it a stock dampner? I have a Powerforce and I had to remark it as it
was waaaay off. It was a kinda generic balancer. I did the TDC thing
with a dial indicator and put the mark on the dampner for TDC myself.


Rich Kinsley  '64 Polara 4 dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.