Re: synvrs normal.

["Don H." <mopar4me@xxxxxxxxxxx>]

I had a convertor and transmission built by Frank Lupo's Dynamic for behind 
a 340 I'm putting in a 65 Dart wagon.  They said to use Dextron III, which 
is what they used when they tested the trans.  I'm wondering if I should 
continue to use the Dextron or can I switch to the Mobil?
Don in VA
----- Original Message ----- 
From: "Sean B" <polecat2@xxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Thursday, June 28, 2007 3:57 PM
Subject: RE: synvrs normal.


> Don D., on your advice, I filled my bone-dry 727 completely with Mobil 1
> ATF.  I am very glad to have done so.  However, you recommend sythetic
> Mobil 1 in the trans, but not the engine.  Why?  I'm sure this is apples
> and oranges.  Does it have to do with the fact that there is no
> combustion going on in the trans?  I also filled my bone-dry power
> steering pump and box with Mobil 1 ATF.  Did I err?
>
> Thanks,
>
> Sean
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.