RE: Clutch Linkage Question

[Nico Over <nover@xxxxxxxx>]

Thanks Dave, that is what I thought but could not remember
Nico


On Sat, 29 Sep 2007 17:07:56 +0000, Dave Walters wrote
> Nico Over wrote:
> > 
> > I just completed the change over from auto to 4 speed on my 64 Sport 
> > Fury with
> > all new clutch components except for the pedal assembly and Z bar, I 
> > find that
> > when I push the pedal to floor it stays there and you physically have to 
> > lift
> > it back up. Any ideas why this might be happening? Clutch is not fully
> > adjusted because the engine is not ready to run yet. The clutch is a 
> > dual disc
> > diaphram type if that makes any difference. I seem to remember way back 
> > when
> > that if you remove the over center pedal spring this would fix the 
> > problem but
> > if that is true, it makes me wonder why the factory put the spring in 
> > the
> > first place. Any help would be appreciated.
> > Thanks in advance
> > Nico Over
> > Va. Beach, Va
> > 64 Sport Fury
> > 63 Dodge 440 wagon
> 
> You have to remove the over-center spring when switching to a 
> diaphragm clutch.It's a pretty beefy spring and I really had a "good 
> time" with that.
> 
>   Dave Walters
>   Denver, Co.
> 
> ----
> Please address private mail -- mail of interest to only one person --
>  directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will 
> protect your privacy, reduce the total volume of mail and fine tune 
> the content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.