Re: cam lift confusion

[Doug Cruser <cruser@xxxxxxxxxx>]

You must take the lobe lift and multiply it by you rocker
ratio..280 x 1.5 comes out to a .420 lift.

Doug
----- Original Message ----- 
From: "Sean B" <polecat2@xxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Saturday, December 29, 2007 6:53 PM
Subject: cam lift confusion


> My friend has a 360 he wants to put into his '64 Dodge.  We put a dial
> indicator directly on a cam lobe to see what it was.  We did it a few
> times, and the lobe lift was .280".  Did we do something wrong?
>
> Thanks,
>
> Sean
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.