RE: '64 Plymouth b-body grille and aluminum molding

[Dan McCormack <mcwheels@xxxxxxxxxxxxxx>]

Well that's what I thought too Kevin and as George said the 
configuration looks all wrong between the 2 years. And yes my 
interchange book says the same thing Gary and I thought the ebay seller 
was wrong too. However after looking at both my cars parked side by side 
I'm not so sure. Yes the 64 cowl is flater and narower and the 
windshields and dashes are completley different but the front lip of the 
cowl that buts up to the hood has the same shape. And both hoods have 
the exact same feature lines. And as Dave said the only difference I see 
besides the holes in the 63 hood for the letters is that there's no 
holes in the inner lip of the 63 hood to get at the nuts that hold the 
64 trim on the front lip. And now Dodger says he has a 63 hood on his 65 
Satellite. This wouldn't be the first time I've seen Mopar pull 
something like this off. Did you know that the hoods on the 73 to 76 
Darts are the exact same hoods that were used on the 69 Barracudas?

Dan


Kevin Merkley wrote:
> 
> Hi Dan,
> 
> I would be surprised if the 63 hood would fit correctly on a 64.  The 
> cowl on a 63 is different and comes to something like a point where the 
> 64 is more straight.  
> 
> I have seen the fenders swap but I doubt the hood.
> 
> K.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.