Re: heater buttons stiff

[Dan McCormack <mcwheels@xxxxxxxxxxxxxx>]

Sean, Go to the tech page on Gary's site:

http://www.1962to1965mopar.ornocar.com/techstuff.html

Scroll about 1/3 of the way down the page and click on Kevin Merkley's 
article on heater operation and on the 2 part article on rebuilding the 
heater switch and read what Don Vermillion wrote. That should help.

Dan


----- Original Message ----- 
From: "sean dietz" <dietz_diggler@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, February 12, 2008 9:43 AM
Subject: heater buttons stiff


> i took my dash out and removed the heater buttons for
> easier access. (they worked fine) when i put
> everything back in all went smoothly enough, till i
> went to use my heater, now the buttons are real stiff,
> to the point where sometimes you have to pull a little
> on the one depressed to allow the other to go in
> easier. i took it back out and didnt see anything that
> stood out as unordinary. any ideas?
> Sean Dietz


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.