Re: carb whistle

[phamaday@xxxxxxxxx]

Gasket, carb base or body.

Hammer


--- On Sun, 2/17/08, Sean B <polecat2@xxxxxxxx> wrote:

> From: Sean B <polecat2@xxxxxxxx>
> Subject: carb whistle
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Sunday, February 17, 2008, 6:41 PM
> We put a used 360 in my friend's car today, with a
> freshly-rebuilt 
> Thermoquad.  There is no ported vacuum line on this carb,
> so we hooked 
> the distributor vacuum advance to a nipple on the carb
> base.  It now 
> whistles until we give it the slightest amount of throttle.
>  The whistle 
> will even stop when we just jiggle the throttle shaft on
> the carb.  When 
> we unhook and plug it back up, the whistle goes away.  Any
> ideas?
> Thanks,
> 
> Sean
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send parts/car
> transactions and negotiations as well as other personal
> messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.