RE: 63 Polara idle RPM?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 63 Polara idle RPM?



Jim,

I'm far from an expert, but my 62 polara was acting the same way and it was
the carburetor.

Don Vermillion
62 polara 500 convertible


-----Original Message-----
From: Jim Altemose [mailto:jaltemoose@xxxxxxxxx] 
Sent: Friday, March 07, 2008 2:00 PM
To: 1962to1965mopars
Subject: 63 Polara idle RPM?

Another question; same 63 Polara w/383.  When I start it up, it's
revving high for a while.  It takes a few minutes and a number of
tries, but after a while I'm able to tap the gas pedal enough for the
RPM's to kick down to what I'd think is normal.  Any thoughts?  As
always, thanks.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 














Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.