Tell me about the fuel sending unit

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

Hey guys,

I'm getting near to removing my gas tank for cleanig
and upgrades. It'll be about $75-$85 to get it
cleaned/tested, inside coated and a drain plug
installed. 

What I'd like to know is if I need to replace the fuel
pick-up and sending unit to convert to 3/8" line?
Someone told me they just adapted to 3/8" from the
5/16" with a rubber hose. There is a rubber hose off
the tank anyway. How about a fuel filter there with a
5/16" in and 3/8" out? Will a fuel filter cause
problems right off the tank? Will the fluid dynamics
of this size difference cause any bad problems? It's
working with the 5/16" now but maybe that's part of my
top end laziness. I'll leave it alone if it becomes
too big a can of worms.

Shoot me some ideas and part numbers/sources if you
have any suggestions/answers.

Thanks,
Rich Kinsley '64 Dodge Polara 4 dr 318poly w/goodies


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.