RE: Tire size question

[george smith <bt6t4@xxxxxxxxx>]

I've got a 68 Dana 60 in my 64 Polara.I'm running 15x8
1/2 with 275R60/15's with at least 3/4" clearance.
--- Sean B <polecat2@xxxxxxxx> wrote:

> 
> Gary, I'd like to remind members that when they swap
> in a later rear 
> end, the track is wider.  For example, I put a 1968
> rear into my 1964 
> Plymouth, and it is 3/4" wider on each side.  There
> is not a lot of room 
> on the outside wheel well as it is.  This is a very
> popular swap.
> 
> Sean
> 
> 
> spigot2039@xxxxxxxxxxx wrote:
> > 
> > Hi all,
> > 
> > I've got a set of 235-60 R15's but I think
> something a tad bigger should 
> > fit on stock cop car rims bolted on a 1962 B body.
> Any tires size 
> > suggestions?
> 
> 
> ----
> Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e.,
> send parts/car transactions and negotiations as well
> as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This
> practice will protect your privacy, reduce the total
> volume of mail and fine tune the content signal to
> Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
> 
> 


George



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.