Re: metal cover

[Leslie Thrasher <redred1@xxxxxxxxxx>]

Those items were never serviced and do not have a PN assigned.  You will
have to make them!!
----- Original Message ----- 
From: "Dave" <civiltech@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, May 07, 2008 7:14 PM
Subject: re: metal cover



Am trying to find the part name and number for the driver side metal
piece that goes over the wiring as the wiring runs along the floor board
and is under the driver side sill plate in my 1964 Dodge Convertible. It
is held down with long metal pieces that are screwed into the edge of
the floor pan along the sill. I can't seem to find it in my parts book;
the closest I can get is to call it a cover. If anyone has a source,
that'd be great to get, too. Any help would be appreciated. Guess if I
have to I can make one.

64 Dodge Polara 500 Convertible
Elizabeth, CO


----
Please address private mail -- mail of interest to only one person -- 
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.