Re: sloppy box

[Joey <jake4@xxxxxxxxxx>]

I think if you go to Mopar Action's website and look into the technical
archive you will find a good explanation of the adjustment.

Joey



----- Original Message -----
From: "cathie waring" <cathiew@xxxxxxxxxxxx>
To: "mopar forum" <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, May 13, 2008 2:35 PM
Subject: sloppy box


>
>
> hi, i recently rebuilt my front end but wasn't able to afford to get the
steering box rebuilt[ starts at $500 upwards] someone mentioned that by
adjusting the screw on top of the box you can remove some of the slop. if so
is it as simple as loosening nut tightening screw in & so on? hoping this
may work until i can get money to rebuild box. thanks, richard [oz]
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.