Re: Max Wedge Aluminum Fan

[David orr <fe2orr@xxxxxxxxxxxxxx>]

I am reading from the original service bulletins from Chrysler. Dec 1963All 
super stock eng and 426 street wedge will be eqiuped with seven bladed fan., 
pic shows  Alum,5, FIVE RIVETS, fliud drive, non thermal 18" fan.  Part 
no.fan 2121013, changed in 66 to part no. 2265034,  vis drive part no. 
2268903 . All picture show a 5 FIVE  rivet fan blade.  This may have changed 
over the years as parts were superceded to others but thwese are the correct 
ones for the 61, 62 ,63 64 65 years  Dave O
----- Original Message ----- 
From: "Nick Tiberio" <furyus63@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, July 22, 2008 9:03 PM
Subject: Max Wedge Aluminum Fan


> I've picked up a 7-blade aluminum fan. The seller told me that it was
> used on the 426III wedge, 864 hemi, & A-990 hemi. I've never come across
> an aluminum fan before. I sold my '64 426III back in the 70's and
> remember nothing about the fan. I'd like to use this fan on my new max
> wedge
>
> It does have several markings plus the D over C, large P over D. I see
> this on many parts including my light lens. What does DCPD stand for.
>
> I'll try to link a photo of the fan.
>
> http://s329.photobucket.com/albums/l380/FuryUs63/?action=view&current=fan.jpg
>
>
> Nick Tiberio
> FuryUs63
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.