RE: AHHAH!!!!!!!!!!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: AHHAH!!!!!!!!!!




Rich Kinsley wrote:
> 
> 
> Don Dulmage wrote:
> > 
> > 
> > You had a new headliner put in you car! Me too. They pinched the dome 
> > light wire andthat blows the fuse I think. I unf hooked the wire till i 
> > had time to find the pron blem. It was fine before the headliner but no 
> > good after. It is the yellow wire under the dash coming from the 
> > pasenger or right hand side of the car.  Had someone at cuisenght last 
> > week with the same trouble and his brother came and asked me waht was 
> > wrong. it was the same. Maybe your is too. Worth a look anyway. I m 
> > pullin foryou. i hope you get to the bottom of this soon. 
> > Don
> =====================================================================
> Good thought but it's still the original headliner and the dome light 
> works fine with the door switch. Me thinks the light switch is an issue. 
> 
> The dash lights flicker and are very dim at best. The rheostat seems 
> boogered. I blew the dash/taillight fuse at the drags too. I'm gonna 
> look for a headlight switch and get some fusible links to do the swap to 
> 
> by-pass the bulkhead connector which has been band-aid fixed for years 
> after a meltdown.
> 
> Anybody remember the NAPA parts number for the headlight switch for my 
> '64 Dodge? Or any number?
> 
> 
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
=====================================================================
I bought the NAPA switch which is Echlin #HL6571 for $25.99. It went 
right in but the old one was hard to get out as the rod didn't want to 
release and pull out. Turns out it was pulverized inside and I think the 
chunks were blocking the release. I did finally get it and was pleased 
that the new one didn't fight me. I am in the process of doing the 
ammeter by-pass and running the power straight through the bulkhead 
connector. I feel confident this will cure my problems as I was getting 
all sorts of weird resistance due to the bad and changing connections. 
That causes voltage values to change also. I hope I can get it finished 
before my dyno session next Wed.!!


Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.