Re: tranny hum and surge
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: tranny hum and surge




Hi Neal,
Make sure your throttle linkage is adjusted properly. If not that will cause the flare in your shift. If that's OK, then you may have a seal going out on the direct clutch in the transmission.
Stevan Miner
Miner Auto Service
Winnebago, MN

--------------------------------------------------
From: "neal zimmerman" <neal.zimmerman@xxxxxxxxx>
Sent: Friday, October 10, 2008 7:52 PM
To: <1962to1965mopars@xxxxxxxxxx>
Subject: tranny hum and surge

concerned about my new 64 cudas 904 torqueflite.
 it supposedly has a shift kit in it. but the torque convertor is stock.
  the first thing it does is a gentle hum it makes when u take off,
its not a violent or rough sound but i have never heard it in an
automatic tranny car before. i beleive it stays there but just gets
obliterated by road noise  as the speed accelerates.   Do shift kits
make trannies sound deffierent.
 Then the second concern is a slight rev between  2and 3 .   U can
see it rev about 200-300 rpms between shifts on the tach.
 can that be adjusted out??
 thanks
neal zimmerman, eugene oregon


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.