ADM is Auto Metal Direct, the phone number is 1-866-591-8309, ask for Jeremy. Good Luck, Joey ----- Original Message ----- From: "Alex Ariemiea" <ajaremea@xxxxxxxxxxx> To: <1962to1965mopars@xxxxxxxxxx> Sent: Saturday, October 18, 2008 10:31 PM Subject: Re: full trunk repro pans available > > > Scott, You mention ADM, who is this and do they have a web site? I wasn't happy with Kramers inner fenders, they needed lots of inprovements before I could install them. > Alex > > --- On Sat, 10/18/08, Scott Weippert <srw-409@xxxxxxxxx> wrote: > > From: Scott Weippert <srw-409@xxxxxxxxx> > Subject: Re: full trunk repro pans available > To: 1962to1965mopars@xxxxxxxxxx > Date: Saturday, October 18, 2008, 8:29 AM > > Hi guys, Further into the same MCG issue is an AMD 2-page ad that has the > full 62-65 b-body trunk pan also. They have run that same ad a few times > before. AMD could be the supplier, but the MCG article is written as though > Kramer went through the trouble of making his own pan and there is no > reference to AMD. They look like identical products but if you look closely > at the pictures the AMD pan has the holes in the pan punched out but the > Kramer pan does not. I suppose it could be a pre-production piece. I need to > add that I haven't seen the trunk pan on AMD's website yet but if they > are > making them they should be available from any AMD reseller. > > I won't be needing a trunk pan for at least a year, so I'm hoping more > light > will be shed on this by next summer and I am very happy to see this part > being made. I hope I didn't muck things up with this post. > > Scott > > ----- Original Message ----- > From: "Gary H." <spigot2039@xxxxxxxxxxx> > To: <1962to1965mopars@xxxxxxxxxx> > Sent: Friday, October 17, 2008 10:01 AM > Subject: Re: full trunk repro pans available > > > > > > All I can say is that the article claims the pans are 100% accurate. MCG > > has not always got it right before, though. > > > > Gary H. > > > > -----Original Message----- > > > >>... and the floor pans .... > >> > >> > >>----- Original Message ----- > >>> > >>> > >>> I hope there made better than the inner fenders that he sells. > > > > > > ---- > > Please address private mail -- mail of interest to only one person -- > > directly to that person. I.e., send parts/car transactions and > > negotiations as well as other personal messages only to the intended > > recipient, not to the Clubhouse public address. This practice will protect > > > your privacy, reduce the total volume of mail and fine tune the content > > signal to Mopar topic. Thanks! > > > > '62 to '65 Mopar Clubhouse Discussion Guidelines: > > http://www.1962to1965mopar.ornocar.org/mletiq.html. > > > > > ---- > Please address private mail -- mail of interest to only one person -- directly > to that person. I.e., send parts/car transactions and negotiations as well as > other personal messages only to the intended recipient, not to the Clubhouse > public address. This practice will protect your privacy, reduce the total volume > of mail and fine tune the content signal to Mopar topic. Thanks! > > '62 to '65 Mopar Clubhouse Discussion Guidelines: > http://www.1962to1965mopar.ornocar.org/mletiq.html. > > > > -- > [Non-text portions of this message have been removed] > > > ---- > Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! > > '62 to '65 Mopar Clubhouse Discussion Guidelines: > http://www.1962to1965mopar.ornocar.org/mletiq.html. > ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.