Fw: RE: Pistons?

["MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>]

For some reason, I can't direct reply to a post.(see below) I can however
send as a forward.And I am using plain text--hmmmmm.........................
...MO...........SW IOWA 

-------Original Message------- 
 
From: Cheryl & Steve Mick 
Date: 2/3/2009 8:41:33 PM 
To: 1962to1965mopars@xxxxxxxxxx 
Subject: RE: Pistons? 
 
Yes Dodger that's right . My motorhome 413 has the low compression dished
pistons. Thanks Bill and Rich, that is exactly the piston I have been
thinking of. I will compare prices between Campbell and my local parts house
I will need to find out if that 9.75 :1 comp is with steel thin gasket or
thicker Fel-Pro gasket.....................MO...............SW IOWA 
 
-------Original Message------- 
 
From: Rich Kinsley 
Date: 2/3/2009 7:24:53 PM 
To: 1962to1965mopars@xxxxxxxxxx 
Subject: RE: Pistons? 
 
Campbell was THE best source I found for my poly parts. They are very 
Mopar knowledgeable. 1-804-779-0888 ask for Harold. 
Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies 
===================================================================== 
Bill Parker wrote: 
> 
> 
> 
> Good point, I kind of overlooked that didn't I... 
> 
> Anyway, checking on line, a place called Campbell Enterprises lists the 
> Sealed Power #238P as a flattop piston for 413, here's a link, heck 
> can't hurt to check with them: http://tinyurl.com/c3nvt2 
> -- 
> [Non-text portions of this message have been removed] 
> 
 
 
 
Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies 
 
 
---- 
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic. Thanks! 
 
'62 to '65 Mopar Clubhouse Discussion Guidelines: 
http://www.1962to1965mopar.ornocar.org/mletiq.html. 
 
. 
 
 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.