RE: Rear-end gear ratios

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

Mundane ?????????  That 383 is rated at 305hp. I drove my folks '63 
Station wagon with that engine and it was a killer. Lot's of fun. My '64 
383 4 bbl was more fun though. The 3:23 was a very standard ratio back 
then for the Mopars. My stock rear-end in my '64 Polara was a 2:73. It 
was marked right on the diff.. I bet you have it on your diff somewhere. 
Sometimes they had tags on a bolt too. You can always count revolutions 
too to get in the ballpark. I think they had 2:73, 2:96 and 3:23. I 
believe it should be one of those.
Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
=====================================================================
mikelj@xxxxxxx wrote:
> 
> 
> 
> I am curious what the gear ratio is for the rear-end of my '64 Dodge 
> Polara 500.  I can't find anything about that on the window sticker, 
> build-sheet, tag, etc.  It seems like it is around 3:00, and I am sure 
> they didn't have many choices in the mundane 383 2 bbl. TorqueFlight 
> setup.  Anyone know?
> Mike in New Mexico
> 
> 
>  
> --
> [Non-text portions of this message have been removed]
> 



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.