Re: Installing new torsion bars

[Dodger7998@xxxxxxx]

tool not needed,,,,,,,,,,it is used to protect the one being removed, but  
you are replacing them anyway so get out however, not needed for  installation
 
 
In a message dated 3/23/2009 9:33:23 A.M. Central Daylight Time,  
mopar4me@xxxxxxxxxxx writes:


And  if your mechanic is not familiar with Mopar torsion bars, don't 
forget to  remind him to unload the tension of them before whacking away 
at the LCA,  rubber sleeve on the TB and vise grips, or he might even 
have the proper  tool.
Don in VA

SB wrote:
> To remove a torsion bar, I just  take a big hammer and whack away at the 
> lower control  arm.
>
>
> ----
> Please address private mail -- mail  of interest to only one person -- 
directly to that person.  I.e., send  parts/car transactions and negotiations as 
well as other personal messages  only to the intended recipient, not to the 
Clubhouse public address. This  practice will protect your privacy, reduce the 
total volume of mail and fine  tune the content signal to Mopar topic.  Thanks!
>
> '62 to  '65 Mopar Clubhouse Discussion Guidelines:
>  http://www.1962to1965mopar.ornocar.org/mletiq.html.  
>
>
>
>   


----
Please  address private mail -- mail of interest to only one person -- 
directly to  that person.  I.e., send parts/car transactions and negotiations as 
well  as other personal messages only to the intended recipient, not to the  
Clubhouse public address. This practice will protect your privacy, reduce the  
total volume of mail and fine tune the content signal to Mopar topic.   Thanks!

'62 to '65 Mopar Clubhouse Discussion  Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.  





**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100126575x1219858252x1201366219/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26hmpgID
%3D62%26bcd%3DMarchfooterNO62)

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.