
Re: Torsion Bars
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Torsion Bars
- From: george smith <bt6t4@xxxxxxxxx>
- Date: Sun, 28 Jun 2009 21:11:33 -0700 (PDT)
I don't believe they can go on either side. Has to do with the twist when they're made.Can someone confirm this?
George
--- On Sun, 6/28/09, Ollie <satellite1965@xxxxxxxxxxx> wrote:
> From: Ollie <satellite1965@xxxxxxxxxxx>
> Subject: Re: Torsion Bars
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Sunday, June 28, 2009, 6:39 PM
>
> I beleive that that Just Supension manufactures their own
> torsion bars and they say they can be used on either side?
> Maybe that is the sorce of those bars. Check there web site
> and give them a call. As far as Mopar Performance they will
> be marked L or R. Yes, the increased dia will give u a
> stiffer ride.
> Ollie
> ----- Original Message ----- From: "Kevin Merkley" <krmerkley@xxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Sunday, June 28, 2009 2:33 PM
> Subject: Torsion Bars
>
>
> >
> > Hi,
> >
> > I have a club member that wants to sell me a new set
> of torsion bars
> > that he ordered but were wrong for his car. He
> has a 65 Monaco and he
> > received 65 B body bars.
> >
> > My concern is that they are not marked for left and
> right and they are
> > just over 1" in diameter. The original bars are
> slightly bigger than
> > 7/8" in diameter.
> >
> > The car is a 64 Polara 500 ragtop with a 383
> (originally a Poly 313).
> >
> > Questions for you all.
> >
> > 1) Are aftermarket bars non directional (until they
> are installed)?
> >
> > 2) Will the 1" diameter bars make the ride
> considerable stiffer?
> >
> > Thanks.
> >
> > K.
> >
> > Kevin R. Merkley
> > Thunder Bay, Ontario
> > 64 Dodge 440 2dr HT (Cdn)
> > 64 Dodge Polara 500 Convertible (Cdn)
> >
> >
> > ----
> > Please address private mail -- mail of interest to
> only one person -- directly to that person.
> I.e., send parts/car transactions and negotiations as well
> as other personal messages only to the intended recipient,
> not to the Clubhouse public address. This practice will
> protect your privacy, reduce the total volume of mail and
> fine tune the content signal to Mopar topic. Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
>
>
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person. I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic. Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>
Back to the Home of the Forward Look Network