Re: Torsion Bars
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Torsion Bars



Yup, torsion bars only twist in one direction. <"Come on baby lets do the twist!">

"Mopar torsion bars are preset at the factory in the direction of use. You can observe this preset by laying the bars down on a flat surface and observing how the bar is twisted. The driver’s side bars will have a 30 degree right hand twist. A passenger side bar will have a 30 degree left handed twist. Pre-setting the bars in this manner improves the load carrying capacity in the pre-set direction. But, the load carrying capacity is reduced in the other direction of twist. This is why it is so important to get the bars installed on the correct side of the car."
http://www.arengineering.com/articles/tbartango.html

Also see http://www.1962to1965mopar.ornocar.org/ml-mopar-torsion-aire-suspension.html

Thanks,
Gary H.

-----Original Message-----
 
>
>I don't believe they can go on either side. Has to do with the twist when they're made.Can someone confirm this?
>George
>
>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.