Re: how can you tell a real maxwedge car?

[steve hracs <t2t@xxxxxxxxxx>]

here's what i have   32  4124xxxx is it possible?
----- Original Message ----- 
From: "Jim Altemose" <jaltemoose@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Thursday, April 23, 2009 10:02 AM
Subject: Re: how can you tell a real maxwedge car?


${top_text_ad}
Steve,

The VIN tells you if it's an original Maxie.  You can confirm the VIN
either through Chrysler Historical, Galen Govier, or the easiest way
is get one of Darrel Davis's books.  I have his 63 book, not 64, but
they list every Maxie VIN.

So how do you know the VIN is valid for the car?

On the radiator support is stamped a 10 digit number that will match
the IBM card and the broadcast sheet, if you have either of those.  If
you don't, Chrysler Historical can send you a copy for $45.

http://chryslerheritage.com/pg904.htm

On the rear package shelf on the top side below the upholstering there
is the same number stamped that is on the radiator support.  The
number will be ten digits and some may look like letters, i.e, a 1 may
look like an I.  The first digit is year, the second plant, the next
four the schedule date and the last four the plant number.  On a 65
the third through fifth is the schedule date and the last five the
plant number.

If you find the number, Darrel Davis would confirm it for you; I find
him to be very helpful and he answers my emails.  But it would
probably be good manners to buy his book first.

http://racehemi.maxwedge.com/dld/

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco



On Wed, Apr 22, 2009 at 10:38 PM, steve hracs <t2t@xxxxxxxxxx> wrote:
> what # am I looking for?
> ----- Original Message ----- From: <roger@xxxxxxxxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Wednesday, April 22, 2009 2:36 PM
> Subject: Re: how can you tell a real maxwedge car?
>
>
>
> The vin will tell you if you have that number
>
>
> ------Original Message------
> From: steve hracs
> To: 1962to1965mopars@xxxxxxxxxx
> ReplyTo: 1962to1965mopars@xxxxxxxxxx
> Sent: Apr 21, 2009 7:07 PM
> Subject: how can you tell a real maxwedge car?
>
>
> have 64 belvedere don't have fender tag so how can i tell if it was a real
> max car. anything on the body etc.. thanks

${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person --  
directly to that person.  I.e., send parts/car transactions and negotiations 
as well as other personal messages only to the intended recipient, not to 
the Clubhouse public address. This practice will protect your privacy, 
reduce the total volume of mail and fine tune the content signal to Mopar 
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.