Re: window trim help

[Joey <jake4@xxxxxxxxxx>]

I use the KD 2038, works great but you must be patient.
Joey
----- Original Message ----- 
From: "Steven Charette" <stevec@xxxxxxxxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, December 01, 2009 5:29 PM
Subject: RE: window trim help


> MO,
> There is a special tool available at most parts stores - it is
> basically a handle with a flat steel arrow-head looking affair that you
> slide under the molding.  You slide the outer tip of the arrow under the 
> lip
> of the molding clip and gently rock the tool to pry the clip up (toward 
> the
> window, away from the body) and release the molding.  It will make more
> sense once you see the tool.
>
> I can't find a picture of the one I have but there is a similar tool
> shown here http://www.mytoolstore.com/kd/kdbody01.html as PN 2038.  The 
> hook
> is inserted under the molding and you hook the clip and rock it to release
> the molding.
>
> SC
>
> -----Original Message-----
> From: MO ( Steve Mick) [mailto:micher@xxxxxxxxxxxxxxx]
> Sent: Tuesday, December 01, 2009 4:26 PM
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: window trim help
>
>
> I have a 1964 Dodge 440  2 dr hdtp. Can someone give me advice or tips on
> removing the Windshield and back glass stainless trim that surrounds 
> them?(
> outside) We got the side -dripedge trim off as they were fastened
> with screws, and the sides of  the windshield.   Don't want to just go
> prying away as I want to save the trim. Any help is
> appreciated............................MO
>
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and 
> negotiations
> as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.