Re: rocker arms

[Don Gallimore <dongallimore@xxxxxxx>]

I had to buy new pushrods with the roller rockers.  Got them from Comp 
Cams.  Bought an adjustable pushrod length checker from Summit (Comp Cam 
part) to make sure I got them to the right length.  My machine shop 
assembled the pushrods. If memory serves me right, the new pushrods were 
shorter.

Akron Don

moparbikeguy@xxxxxxx wrote:
> Are the rocker shafts interchangeable between the stamped steel hydraulic rockers and the stock ductile iron adjustable 
> rockers? Where do you get pushrods for adjustable rockers and hydraulic lifters?
>
> '65 Coronet 500 stroker
>
>
>
> -----Original Message-----
> From: Don Gallimore <dongallimore@xxxxxxx>
> To: 1962to1965mopars@xxxxxxxxxx
> Sent: Sat, Dec 12, 2009 10:22 am
> Subject: Re: rocker arms
>
>
> I have a .550 lift cam and hit on the baffle there. A little "tap tap" and things seem okay now. 
>  
> Akron Don 
>  
>   


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.