Re: heads
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: heads




The car came with a 426 street wedge and four barrel, now has a crossram on it, I was thinking that the previous owner, used the sw heads. But you say they won't fit the crossram right? ----- Original Message ----- From: "Donnie Schanz Jr" <dcs426@xxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Thursday, December 24, 2009 9:22 AM
Subject: Re: heads



Yes, the ports are huge when compared to a 426 S.W. or a 440. If you have an aftermarket intake or factory single four, you have 426 S.W. heads. There are no other intakes except the factory crossram and a few Indy pieces that fit.

Donnie
----- Original Message ----- From: "Donald Gallimore" <dongallimore@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Thursday, December 24, 2009 12:05 PM
Subject: Re: heads



From Mopar Muscle:

Max Wedge heads are easily identifiable by the lack of a heat cross-over passage, large 1.88-inch exhaust valves, and very large ports. Casting numbers for the Max Wedge heads end in either 286, 209, or 518


Akron Don

There are no heat riser ports on a max wedge head. The area between the two center intake parts should have no openings.

Then there's the casting number which is located in the valve springs area. I'm sure there's a listing of head casting numbers somewhere on the 62-65 website.

Akron Don




________________________________
From: Harry Skalla <moweepea@xxxxxxxxxxx>
To: 1962 1965 <1962to1965mopars@xxxxxxxxxx>
Sent: Thu, December 24, 2009 10:50:27 AM
Subject: heads


First of all Merry Christmas to all. I have a set of 426 heads on my car, how do I tell if they are Max Wedge heads or street wedge heads? Without taking them off.Thanks...Butch

----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.




________________________________

From: Donald Gallimore <dongallimore@xxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Thu, December 24, 2009 11:39:30 AM
Subject: Re: heads

--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.