Re: projects in progress

[Dave64 <lt7dave@xxxxxxxxx>]

My project this winter has consisted of laying around for the past 8 weeks after a total hip replacement on 12/7 (doing the appropriate exercises, of course).  Too cold in WI to work on my '64 Belvedere anyway, so it's tucked away in my buddy's garage with his cars.  I'm going back to work on Monday.  Hopefully I'll be back up and running well enough in the spring to do the rearend and spring swap I have planned for the '64.  

Dave

--- On Fri, 1/29/10, Dodger7998@xxxxxxx <Dodger7998@xxxxxxx> wrote:

> From: Dodger7998@xxxxxxx <Dodger7998@xxxxxxx>
> Subject: Re: projects  in  progress
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Friday, January 29, 2010, 2:39 AM
> 
> 
> Hey MO........don't be making promises you can not
> keep,,,as I am really  
> wondering if this winter will come to an end,   
> I have pretty  much 
> completed the 65/63 sportlite, and have been playing with a
> 1,8 Lazer  turning it 
> into a three wheel motorcycle, and been gathering parts for
> two more  projects 
> a revamped 80s dodge stepside into a 4 wheel drive
> warlock,,,,,also  have 
> the Conquest that I picked up that I want to put my 413
> small block  
> in,,,,,other than that will be a quiet year,,,,,
>  
>  
> In a message dated 1/29/2010 2:22:21 A.M. Central Standard
> Time,  
> micher@xxxxxxxxxxxxxxx
> writes:
> 
> 
> I  see a lot of list members on here this
> winter.  What are you all working 
>  
> on this off season?  Any drag racers  getting
> ready for opening  day at the 
> strip?
> I have been doing a little on my 64 Dodge
> 440.   Accumulating  some more 
> parts-researching disc brake swap. Removed  the heater
> assembly- clutch and 
> brake pedal assembly- . next will be the  wiper motor
> and linkage and the 
> instrument cluster face plate for  restoring.. I have
> a few rust throughs 
> in 
> the air plenum for the heater to  patch and try to
> coat inside plenum with 
> rust encapsulator.  This  coming week I want to
> repair a couple holes in 
> the 
> floor and weld in a  four speed tunnel hump. And I
> think I will order the 
> bracket and adapters  for the front disc brakes. 
> I want to talk to a leaf 
> spring  manufacturer in Omaha to see if he can make me
> up a set of heavy 
> duty 
> rear  springs or maybe even SS springs if he can get
> the specs. Warmer 
> weather  and sunshine will be here SOMETIME---I 
> 
> promise!.........................................MO  
> 
> 
> ----
> Please address private mail -- mail of interest to
> only  one person -- 
> directly to that person.  I.e., send parts/car
> transactions  and negotiations as 
> well as other personal messages only to the intended 
> recipient, not to the 
> Clubhouse public address. This practice will protect 
> your privacy, reduce 
> the total volume of mail and fine tune the content
> signal  to Mopar topic.  
> Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion  Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html
> and  
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. ;
> 
> 
> 
> 
> 
> --
> [Non-text portions of this message have been removed]
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> 
> 
>