RE: Rear-ends
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Rear-ends



I was trying to make sense from all the literature I have and it sounds 
like you're right.

Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
===================================================================
Brian Schlump wrote:
> 
> 
> Rich Kinsley wrote:
> > 
> > Got your attention? I'm going to have to delve into new territory for me 
> > 
> > in that the 489 rear in my '64 is leaking at the axle seals and the 
> > front pinion seal is also leaking. 
> 
> Rich, I put a 489 rear end in my '64 Belvedere, and if I remember right, 
> 
> you'll need to order a front crush sleeve (it fits behind the pinion 
> seal) when you replace the pinion seal....Brian
> 
> 
> '68 Coronet R/T
> Davenport, Iowa
> 
> "The difference between ordinary and extraordinary is that little 
> extra."



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.