RE: Console Tach

[Steven Charette <stevec@xxxxxxxxxxxxxxxxxxxx>]

I found the same thing.. just the regular old Sun Super Tach, drops right in
the hole. Bought one a few years ago to fill in while my Autometer was out
being repaired - $30-40 in Summit, IIRC.

SC

-----Original Message-----
From: ffparamederek@xxxxxxxxx [mailto:ffparamederek@xxxxxxxxx] 
Sent: Tuesday, March 30, 2010 11:45 AM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: Console Tach

That is great!  What diameter tach will fit in there?  I'd measure myself
but my car is at the body shop

Derek
65 Sport Fury
Sent via BlackBerry by AT&T

-----Original Message-----
From: Bill <Y1TopBanana73@xxxxxxxxx>
Date: Tue, 30 Mar 2010 08:12:09
To: <1962to1965mopars@xxxxxxxxxx>
Subject: Re: Console Tach

${top_text_ad}
Yes...but they are PRICEY $$$$$! I ended up slipping a Sun Tach in the hole.
Fits perfectly.
--=20
Bill M
65 Coronet 500 'vert http://1962to1965mopar.ornocar.com/mmo62008.html
73 Dart Sport, 00 Cherokee Sport, 01 Dakota SLT
21 Model T Depot Hack, 92 Accord, 06 Mazda 3


On Mon, Mar 29, 2010 at 10:17 PM,  <ffparamederek@xxxxxxxxx> wrote:
> Can you still find a stock tach?
> Sent via BlackBerry by AT&T
>
> -----Original Message-----
> From: Dave Casey <dcasey@xxxxxxxxxxxxx>
> Date: Mon, 29 Mar 2010 20:54:28
> To: <1962to1965mopars@xxxxxxxxxx>
> Subject: Re: Console Tach
>
>
> The only piece you're missing is a single green wire that goes to the 
> coi=
l
> negative terminal. This would have run through the firewall by itself 
> wit=
h a
> rubber grommet, much the same way as the A/C harnesses were done.
>
> Dave Casey
> Sent from my PC
> ----- Original Message -----
> From: "John" <jswask@xxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Monday, March 29, 2010 12:42 PM
> Subject: Console Tach
>
>
>> I'm thinking of putting a stock tach into my console (64 sport fury) 
>> I have 3 tachs and 1 sending unit. Haven't checked to see if the 
>> tach's wo=
rk
>> yet. But my question is. I have the wire harness that goes to the 
>> sendin=
g
>> unit to the tach. But don't have the harness that goes into the 
>> bulkhead=
,
>> then to the distrib,and coil. =C2=A0And there is no diagram shown in 
>> my =
factory
>> repair manual. I have the wire diagram to a sun tach. So i can hook i 
>> up=
,
>> just want to make it look correct. Looking for this wire harness. 
>> Haven'=
t
>> even seen one. =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Thanks John 
>> Was=
k...

${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.