Re: I'm starting a poll
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: I'm starting a poll




Steve,

One concern was having enough compression to allow the camshaft to work properly; my thought was 274adv.dur.w/(230@.050") with 9 to 1 and a maximum of 284/290 with (234-240@.050") w/9.5 to 1.

Just so happens Rich corrected me that he indeed has approx. 9.5 to 1 with 185lbs. cranking cyl. pressure.

I am running10 to 1 in my 402" Poly Stroker with a (250@.050") Hyd. Roller w/.600" lift.

Gary Pavlovich
----- Original Message ----- From: "Steven Charette" <stevec@xxxxxxxxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, June 23, 2010 6:31 AM
Subject: RE: I'm starting a poll



Rich,
If you have the converter for it, my vote is max out the camshaft.
My left brain embraces "More's Law" - "If more is good, too much is just
right."

My first attempt at racing was just after I got out of college.  My
'63 Fleet Special was bone stock, and I wanted to go fast. Being a 20 year
old Expert at Everything, I read the Mopar Performance Bulletins and knew
that the cam and converter had to be matched, so I ordered a 3000 rpm stall
converter and had Crower grind me a fairly radical hydraulic camshaft that
started making power at 3000 rpm.  Man, I was gonna tear it up.

Once we got her to the track, I was really disappointed with the way
the car left - no matter how I launched the car it would just kinda "drone"
for about 30-40 feet, then all hell would break loose.  The first 1-2 car
lengths reminded me of the way a city bus sounds when it pulls away from a
stop.  It finally occurred to me that the motor didn't make enough below
3000 rpm to actually stall the converter.

Long story short, I ordered a Turbo Action 3800, and it really woke
the car up.  At the same time I had removed the pushbuttons (I know,
horrors, but that's how I ended up doing what I do today!) and put in a B&M
Series 60 shifter with a manual shift valve body (anybody remember the old
Kokomo manual valve body?).  After the first two passes I was incredibly
disappointed - although the car was launching at a higher RPM, it still just
didn't leave hard.

A little bench racing with buddies revealed that the weight of my
right arm was pulling the shifter into second gear as soon as the car moved
- once I physically took my hand off the shifter the thing left like a
rocket.

Bottom line - be sure you have enough converter to let the camshaft
work and go nuts!

SC

-----Original Message-----
From: Rich Kinsley [mailto:rlkinsley@xxxxxxxxx]
Sent: Tuesday, June 22, 2010 5:50 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: I'm starting a poll


OK guys here's a poll for you. I'm discussing with Gary P about upgrading
the camshaft, at least, in LeRoar. I have the 264 cam and he's got a 274 cam
which can be had with solid or hydraulic. But I think there is another cam
that is a step up more to I think 284deg. I'm not getting any younger and
I'd kinda lean towards the "I want to go too far" side. What are your
thoughts? Let the voting begin.

Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.