Re: LeRoars current status
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: LeRoars current status



Keep representing the 64 Polaras in Omaha Rich! Someone has to! Thought you were 
considering doing that 440...
 
George



----- Original Message ----
From: Stephen Andrachek <s.andrachek@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Tue, June 28, 2011 8:44:39 PM
Subject: Re: LeRoars current status

I don't think so, but from what I remember, the crankshafts and the oil pans 
still interchange between the two blocks.  I just read this not too long ago 
when someone wanted to build a poly 318.

Its the headbolts being in a different pattern on the two blocks which prevents 
you from using the finest possible modern heads ported to the max with a wild 
cam and high compression and a great induction system that makes a giant HP Poly 
hard to do.  Get a 340 or a 360 block from a car or truck of most any year and 
build that up.

Some guys stuck with the Poly and have made suprising HP with their ingenuity 
more than anything.  They just matched all the parts together and wind up with 
one sweet 318 and they have come up with a way to stroke those old engines too.

It shouldn't take too much research on the web to find some info on the Poly.  
You just have to search it 12 different ways or you can get lucky quick.

My day had a few cars with the 318 poly.  They were hard to kill.

Chick


----- Original Message ----- From: <62to65mopar@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Tuesday, June 28, 2011 6:51 PM
Subject: Re: LeRoars current status



I don't think Hughes makes poly 318 parts, do they?

Thanks,
Gary H.

>  -------Original Message-------

>  This is why I keep telling people to get Hughes  Rocker Arms and Shafts.
>  You get a true ratio of 1.5 or 1.6 (your choice),  no needle bearings to
>  break and they ain't free but are worth the  money.  The stock rocker arms
>  are hard shaft and hard rocker  arm.  Hard on hard causes wear and galling.
> 
>  All I can say to anyone building a Mopar motor (any  size, small or big
>  block) is take my advice, please (on the shafts and rocker  arms).
> 
>  Chick
>  ----- Original Message -----
>  FROM:  Richard  Kinsley
> 
>  Hi Folks,
> 
> 
>  I thought I'd send a note to let everyone know what's going on with
>  LeRoar.  ...

-- --
Please address private mail -- mail of interest to only one person --  directly 
to that person. That is, send parts/car transactions and negotiations as well as 
other personal messages only to the intended recipient, not to the Clubhouse 
public address. This practice will protect your privacy, reduce the total volume 
of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and 
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- You received this message because you are subscribed to the Google Groups 
"The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


-- --
Please address private mail -- mail of interest to only one person -- directly 
to that person. That is, send parts/car transactions and negotiations as well as 
other personal messages only to the intended recipient, not to the Clubhouse 
public address. This practice will protect your privacy, reduce the total volume 
of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and 
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- You received this message because you are subscribed to the Google Groups 
"The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.