Re: Manual Steering Box Seals Needed

["Dennis C." <dennis.2914@xxxxxxxxx>]

Thanks to all who responded, they were all good suggestions.  I
ordered the seal from Rock Auto today, for the price I ordered 2, I am
going to replace the power steering on my 64 Plymouth with manual and
I'm sure I'll need the extra seal then.

Thanks Again
Dennis C.



On Aug 15, 10:19 pm, "Dennis C." <dennis.2...@xxxxxxxxx> wrote:
> Hello,
>
> I am looking for the oil seal for the pitman shaft of the manual box
> on my 63 Sport Fury.
>
> So far I have not found anything online and my local dealer does not
> have anything on older cars.  I have been to Motion Industries and San
> Diego Seal, they took measurements of the seal and the steering box
> and asked it it was metric?  I told them I realy doubted it by it
> could be a one-off seal design just for Mopar.
>
> So far nothing has been found yet.
>
> If anyone has had luck finding this seal I would appreciate the source
> and part number if possible.
>
> Thanks
> Dennis C.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.