Re: Silicone on Everything?

[MO <micher@xxxxxxxxxxxxxxx>]

If you use enough silicone to squeeze  out when tightened, likely the
same amount will be inside the gasket .  And it will eventually come
off and get in the oil.  I love it and I hate
it!.......................MO

On Dec 13, 4:12 am, Herb <zephyr9...@xxxxxxxxxxx> wrote:
> A friend gave me a 361 that he replaced with a 383 because it was suffering
> from low oil pressure.  Pulled it apart and found that silicone was used
> liberally on it instead of gaskets.  Found strings & chunks of various
> colored silicone sucked up into the oil pickup clogging it up.  I am sure it
> did not happen all at one time, but over the years.  Silicone cost him the
> price of and the labor of replacing an engine.  Now that said, a thin layer
> of silicone on both sides of a gasket can help the sealing process in
> extreme circumstances.
>
>    Herb
>
> 1956 Plymouth Belvedere 361 4-Sale
> 1959 Coronet 326 Poly
> 1961 Belvedere Custom Suburban Wagon 318 Poly
> 1961 Dodge Dart Pioneer Wagon 318 Poly
> 1963 Fury 2D/HT 7.0L
> 1963 Sport Fury Convertible 361
> 1970 Chrysler 300 Hurst 440
> 1979 Dodge Aspen R/T Sport Wagon 360
> 1999 Durango SLT 5.9L
> 2008 SRT-8 Magnum 6.1L
> St. Louis, MO.
>
> http://1962to1965mopar.ornocar.com/mmo42009.html
>
>
>
> -------Original Message-------
>
> From: Eric Sturgis
> Date: 12/13/2011 3:01:16 AM
> To: 1962to1965mopars@xxxxxxxxxxxxxxxx
> Subject: Re: Silicone on Everything?
>
> Eric I've found that silicone is great in the bathroom, around sinks, and
> for caluking doors and windows on a house.  I've found very little use for
> it in my car.  Clean, straight surfaces with good gaskets that are properly
> torqued have always worked very well for me.
>
> --
>
> Eric
> Tacoma, WA
> 1962 Chrysler Newport 2 door HT
>
> --
> --
> Please address private mail -- mail of interest to only one person --
> directly to that person. That is, send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will protect
> your privacy, reduce the total volume of mail and fine tune the content
> signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.htmlandhttp://www
> 1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups
> The 1962 to 1965 Mopar Mail List Clubhouse" group.http://groups.google.com/group/1962to1965mopars?hl=en.- Hide quoted text -
>
> - Show quoted text -

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.