Re: 64 dodge four speed

[MO <micher@xxxxxxxxxxxxxxx>]

 I don't know if the 69 K frame is different than the 64 V8 K frame. .
In My case My 64 Dodge had the V8 K frame. I am useing the RB engine
with Mopar four speed which has the slip yoke tailshaft.  I wanted the
correct linkage for the clutch so there would be no geometry issues.
Stock clutch linkage to the clutch fork which is a rather rare fork
for the correct bell houseing.  And the correct tranny mount.--another
hard to find piece  I used the Schumacker reproduction engine brackets-
mounts  and everything lined up spot on.  Brewer Performance has and
shows everything you need including the correct Z bar and the mounting
brackets for it  and the clutch push rods.  I bought from them , e-
bay, and list members here.

Other  options??   Cobble and Hope !   8-)  .....................MO



On Sep 3, 12:42 pm, <ar...@xxxxxxxxxxx> wrote:
> my friend bought a 64 330 dodge it has a 440 and auto trans with a 69 k frame he wants to put in a 4 speed  we are wondering what bell housimg and cluch linkage to use because the motor is not in the stock location thanks tony

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.