Re: intake manifold Mopar big block install?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: intake manifold Mopar big block install?



Gary,
There was some trouble getting the aluminum six barrel intakes to seal properly when they came out so the paper gaskets were introduced. I've used them with and without successfully. I suppose it was machining tolerances from Edelbrock causing the trouble but you didn't hear that from me. There is no reason the factory tin gasket couldn't be used indefinitely over and over if new paper gaskets were used every time. I like to use some sealer like comes with tin gasket from Felpro or Hi Tack sealer on the port area and silicone on the ends to seal everything.
Mike LeFevre 


On Wed, Feb 5, 2014 at 9:39 AM, Gary H. <62to65mopar@xxxxxxxxxxx> wrote:
Hi all,

There is this sentence in the book "How to Rebuild Big-Block Mopar Engines" by Don Taylor
http://www.amazon.com/Big-Block-Mopar-Engines-How-Rebuild/dp/1557881901/ref=as_li_wdgt_ex?&linkCode=wey&tag=the196196mopw-20

 "Select either new valley cover gasket style or, if you plan to use your old gasket, new sealing gaskets."

This is step one in installing the intake manifold on a Mopar big block. Can someone explain what the "new valley cover gasket style" means and, therefore, what the old valley cover gasket style was?

Thanks,
Gary H.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/groups/opt_out.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.