|
Tony Richey <trcharger@xxxxxxxxxxxxx>: Feb 07 01:34AM
Well I am 56 and been around mopars all my life. But never had a poly.. until now that is.. I just got a 48 dodge coupe and it has a poly but it is locked up. I plan to try and unstick it but if ...more |
|
Jason Rhoades <Jason@xxxxxxxxxxxxx>: Feb 06 09:22PM -0500
Yes la will bolt right up. Be advised polys are internal balance other are not necessarily. So balancing is critical the converter is part of the balance trick. Sent via the Samsung GALAXY S® ...more |
|
Tony Richey <trcharger@xxxxxxxxxxxxx>: Feb 07 02:38AM
Thank you for the reply.. they looked the same but wanted to ask.. thanks again Sent from Yahoo Mail on Android On Sat, Feb 6, 2016 at 9:22 PM, Jason Rhoades<Jason@xxxxxxxxxxxxx> wrote: ...more |
|
victor spikes <vicsmopar@xxxxxxxxxxx>: Feb 07 03:05AM
Depends on what year poly you have and the trans that is behind it ,Plymouth polys from 1956 through 1960 used a 8 bolt crank so you need to find out what year poly you have or should I say what trans ...more |
|
Cory Rempel <Cory_383@xxxxxxxxxxx>: Feb 07 03:27AM
When it comes to the tranny you can make a hybrid tranny. Had to do it with my 65 Polara wen me and a buddy swapped in a 440 where the 318 poly was. We took the 440 bell housing, original valve body ...more |
|
victor spikes <vicsmopar@xxxxxxxxxxx>: Feb 07 03:43AM
If you have a cast iron auto trans the later poly or the La motor won't bolt up if you have a aluminum trans then yes it will ________________________________ ...more |
|
B M <polara1964@xxxxxxxxxxx>: Feb 07 04:49AM
As far as I know, there is 1 bold or hole that doesn't match But that shouldn't be a problem. And you probably have thought about it, but why not replace it for another Poly😬😎. ...more |
|
victor spikes <vicsmopar@xxxxxxxxxxx>: Feb 07 06:00AM
Well if it's a later poly he is in luck but the early ones you have to use a adapter and spacer due to a snot on the rear of the crankshaft of the early polys ________________________________ ...more |
|
Jimmy Peavy <peaver63@xxxxxxxxx>: Feb 07 07:29AM -0600
assuming you mean the transmission bolt pattern. Yes they do. Jimmy ...more |
|
Ray Bell <raybell46@xxxxxxxxx>: Feb 07 02:13PM -0800
Come on guys, let's get this information right! Up until 1961 models the Poly had BOTH differences, a different bolt and dowel pattern AND a longer crank with 8-bolt flange instead of 6-bolt. ...more |
|
Tony Richey <trcharger@xxxxxxxxxxxxx>: Feb 07 10:34PM
Thank u guys for the info and the advise.. main reason I wouldnt replace it with a poly is I dont have one.. I have a 225 slant 6 and 3 spd. Sittind around. A 318, 360 and a extra 440. ...more |
|
"zephyr9900@xxxxxxxxxxx" <zephyr9900@xxxxxxxxxxx>: Feb 07 04:56PM -0600
-------Original Message------- From: Tony Richey Date: 2/7/2016 4:34:21 PM To: 1962to1965mopars@xxxxxxxxxxxxxxxx Subject: Re: 318 poly.vs 360 Thank u guys for the info and the ...more |
|
James Hunt <jshunt41@xxxxxxxxx>: Feb 06 11:39PM -0800
Thanks everyone, the operation was a success... They were stamped, just most were facing down. On Friday, February 5, 2016 at 6:49:37 AM UTC-5, James Hunt wrote: ...more |
|
Jimmy Peavy <peaver63@xxxxxxxxx>: Feb 07 07:31AM -0600
those left hand nuts are really hard to find. Crager use to offer them, but stopped. Jimmy ...more |
|
carverex@xxxxxxx: Feb 07 06:07AM -0800
Hi Jimmy and James For anyone needing the L-H Chromed, acorn style nut with the chamfered end, Summit caries Gorilla # 71187L. They come 4 to a set for some reason. This has made for fun ...more |
|
Doug <dougdaniel50@xxxxxxxxx>: Feb 07 02:14PM
napa? From: Jimmy Peavy <peaver63@xxxxxxxxx> To: 1962to1965mopars@xxxxxxxxxxxxxxxx Sent: Sunday, February 7, 2016 8:31 AM Subject: Re: Left or Right those left hand nuts are ...more |
|
"zephyr9900@xxxxxxxxxxx" <zephyr9900@xxxxxxxxxxx>: Feb 07 08:22AM -0600
NAPA? = Never Any Parts Available -------Original Message------- From: 'Doug' via The 1962 to 1965 Mopar Mail List Clubhouse Date: 2/7/2016 8:14:30 AM ...more |
|
Doug <dougdaniel50@xxxxxxxxx>: Feb 07 02:34PM
if you get the right counter person willing to search for you they can find what you want From: "zephyr9900@xxxxxxxxxxx" <zephyr9900@xxxxxxxxxxx> To: 1962to1965mopars ...more |
|
"zephyr9900@xxxxxxxxxxx" <zephyr9900@xxxxxxxxxxx>: Feb 07 10:30AM -0600
Here's what happens in the local NAPA store going in on, say, a Monday, Counter guy; what can I help you with? Me; I need an oil filter for my 63 Fury, 361. Counter Guy; 2dr or 4dr, power ...more |
|
"Hall, Ricky L" <ricky.l.hall@xxxxxxxxxx>: Feb 07 04:51PM
Our local NAPA came under new management several years ago – I had to tell the new owners I was impressed they stocked so much more stuff. And can get anything same day. It’s all about the ...more |
|
ALIENVOICE@xxxxxxx: Feb 07 04:17PM -0500
You can't fix stupid..... In a message dated 2/7/2016 11:30:42 A.M. Eastern Standard Time, zephyr9900@xxxxxxxxxxx writes: Here's what happens in the local NAPA store going in on, ...more |
|
"Hall, Ricky L" <ricky.l.hall@xxxxxxxxxx>: Feb 07 02:16PM
And this Poly has made the printed pages of Hot Rod, April 2016 issue page 37.............. Just received the issue in the mail yesterday............. From: 1962to1965mopars@xxxxxxxxxxxxxxxx ...more |
|
JimJablonski <groovinjim@xxxxxxx>: Feb 07 11:46AM -0800
When I read the article I couldn't help but walk away with a bit of wonder why Mopar hasn't tried to tap into what seems to be an exploding LS aftermarket by marketing and enabling more interest ...more |
|
D J <djohn14296@xxxxxxxxx>: Feb 07 10:19AM
A '66, wrong year????DJ On Friday, February 5, 2016 6:09 PM, 62to65mopar <62to65mopar@xxxxxxxxxxx> wrote: Welcome new member Roel! Below is his introduction. Thanks, Gary H. ...more |
|
Cory Rempel <Cory_383@xxxxxxxxxxx>: Feb 07 10:46AM
My thoughts exactly. Cory ________________________________ From: 1962to1965mopars@xxxxxxxxxxxxxxxx <1962to1965mopars@xxxxxxxxxxxxxxxx> on behalf of 'D J' via The 1962 to 1965 Mopar Mail List ...more |
|
<62-65-mail-list-club@xxxxxxxxxxx>: Feb 07 11:01AM -0600
Ownership of a 1962-1965 is not required to be a member of this mail list. Just interest. The more members the merrier. :) Thanks, Gary H. Admin. ...more |
|
Jason Rhoades <Jason@xxxxxxxxxxxxx>: Feb 07 12:06PM -0500
Thanks gary! Jason Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone -------- Original message -------- From: 62-65-mail-list-club@xxxxxxxxxxx Date: 02/07/2016 12:02 PM ...more |
|
Bob <64ragtop@xxxxxxxxxxxxx>: Feb 07 01:13PM -0600
Gary, I was kinda hoping the gent would get a warmer welcome than the first couple of posts. They seemed pretty dismissive, to say the least. BC ...more |
|
JimJablonski <groovinjim@xxxxxxx>: Feb 07 11:38AM -0800
Hi Roel, Welcome to the group. As a lover of all creatures on four wheels, I would be happy to hear more about your ride. Jim On Friday, February 5, 2016 at 6:09:36 PM UTC-5, 62to65mopar ...more |
|
"Hall, Ricky L" <ricky.l.hall@xxxxxxxxxx>: Feb 07 07:40PM
Always like to see a fellow wagon owner join - and there just are not that many '62 Dart wagons to go around at any rate........... ; ) Ric '62 Dart wagon -----Original Message----- ...more |
|
Travis Rice <travis987654321@xxxxxxxxx>: Feb 07 07:32PM
Nico, I added Firm Feel Suspension adjustable strut rods on my Satellite when I built it. No issues and I don't believe I have even adjusted them since installation. Shows to fit all B's '62 to ...more |
|
"bt6t4@xxxxxxxxx" <bt6t4@xxxxxxxxx>: Feb 07 01:43AM -0600
Tri Y's must have a one year thing. MW exhaust was 63-64.item I think Sent from my HTC One SV ----- Reply message ----- From: furyus63@xxxxxxxxxxx To: "1962to1965mopars" ...more |
|
furyus63@xxxxxxxxxxx: Feb 07 12:38PM
Production MW Manifolds were 62-64.....Nick ----- Original Message ----- From: "'bt6t4@xxxxxxxxx' via The 1962 to 1965 Mopar Mail List Clubhouse" 1962to1965mopars@xxxxxxxxxxxxxxxx ...more |
|
Cory Rempel <Cory_383@xxxxxxxxxxx>: Feb 07 06:18AM
Hey I was just rereading some of this thread and noticed Mr. Dulmage is Canadian. Does anyone have his email to ask him if you still have to pay in US funds if you're Canadian? Thanks Cory ...more |
|
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. |
Back to the Home of the Forward Look Network