Very good Jim; your list of suppliers & builders is top notch.
What times did you run?
Gary P.
Sent: Monday, April 02, 2018 5:33 PM
Subject: Re: Just finished Diamond Hone on the Poly
block....
Hi
Gary,
Running iron 452 heads and slightly over 12:1 compression.
Thank you,
Jim Sent
from Jim’s iPhone
On
Monday, April 2, 2018, 7:25 PM, glpavlovich@xxxxxxx wrote:
Jim,
What compression ratio are you running in the Fury and are you using
aluminum heads?
Gary P.
Sent: Monday, April 02, 2018 7:47 AM
Subject: Re: Just finished Diamond Hone on the Poly
block....
HI Gary,
I've been busy but in a non-Mopar way so I've been quietly lurking on
this board. Don't know if you remember but I finally got a chance to
race the '64 Fury a few summer's ago after the long, long build - and with
TONS help from fellas in this group. Anyway, during one of the
runs a fella in a beat-up Sebring crossed over the line and came within inches
of taking me out. After the race my wife - who by now has totally fallen
in love with the Fury - asked me to not race it again. Seriously, she
said I should get another car for racing given all the time and expense of the
Fury's restoration. Anyway, her side of the family are a long line or
Chevy people (I was always the Outlaw) and soonafter that discussion I tripped
over a sweetheart deal on a race ready Chevelle. I jumped on it before
the time expired on a woman's memory to go buy another car, and since I've
been racing it here and there. Meanwhile, the Fury is still my pride and
joy but is limited to cruising and car shows, although the car was not really
setup for that life (it requires race fuel and is LOUD!). It is a barrel
of fun to win car show awards occasionally, though!
I hope you guys will still talk to me! I made this placard for the
car...
![]()
On Sunday, April 1, 2018 at 7:40:39 PM UTC-4, glpavlovich wrote:
Not at all Jim; what are you working on or enjoy driving/racing these
days?
Gary P.
Sent from my Galaxy Tab
A
-------- Original message --------
Date: 4/1/18 2:54 PM (GMT-08:00)
Subject: Re: Just finished Diamond Hone on the Poly block....
Ah, OK. Thought so. I meant no disrespect, I
probably misread your note.
Thank you,
Jim On Sunday, April 1, 2018 at 5:52:07 PM UTC-4, glpav...@xxxxxxx wrote:
Happy Easter to you also Jim! Squaring & decking first then
the diamond hone.
Gary P.
Sent: Sunday, April 01, 2018 2:41 PM
Subject: Re: Just finished Diamond Hone on the Poly
block....
Hi Gary,
Happy Easter.
Out of curiosity, the honing was completed prior to the
decking?
Jim On Sunday, April 1, 2018 at 12:44:45 AM UTC-4, glpav...@xxxxxxx wrote:
Thank you; credits go to my engine builder friend Gregg Hekimian
who did the diamond hone w/profiliometer readings then had an
experienced machinist (old-timer perfectionist) square & deck the
block with a specified mill .
Gary P.
--
-- -- Please address private email -- email of interest to only
one person -- directly to that person. That is, email your parts/car
transactions and negotiations, as well as other personal messages, only to
the intended recipient. Do not just press "reply" and send your email to
everyone using the general '62-'65 Clubhouse public email address. This
practice will protect your privacy, reduce the total volume of mail and
fine-tune the content signal to Mopar topic. Thanks! 1962 to
1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar. ornocar.org/mletiq.html and
http://www.1962to1965mopar.
ornocar.com/general_ disclaimer.html. -- You received this
message because you are subscribed to the Google Groups "The 1962 to 1965
Mopar Mail List Clubhouse" group. http://groups.google.com/
group/1962to1965mopars?hl=en. --- You received this message
because you are subscribed to the Google Groups "The 1962 to 1965 Mopar
Mail List Clubhouse" group. To unsubscribe from this group and stop
receiving emails from it, send an email to 1962to1965mopa...@ googlegroups.com. For more options,
visit https://groups.google.com/d/
optout. -- --
-- Please address private email -- email of interest to only one
person -- directly to that person. That is, email your parts/car
transactions and negotiations, as well as other personal messages, only to
the intended recipient. Do not just press "reply" and send your email to
everyone using the general '62-'65 Clubhouse public email address. This
practice will protect your privacy, reduce the total volume of mail and
fine-tune the content signal to Mopar topic. Thanks! 1962 to
1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar. ornocar.org/mletiq.html and http://www.1962to1965mopar. ornocar.com/general_
disclaimer.html. -- You received this message because you are
subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse"
group. http://groups.google.com/
group/1962to1965mopars?hl=en. --- You received this message
because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail
List Clubhouse" group. To unsubscribe from this group and stop receiving
emails from it, send an email to 1962to1965mopa...@
googlegroups.com. For more options, visit https://groups.google.com/d/
optout. -- -- -- Please
address private email -- email of interest to only one person -- directly to
that person. That is, email your parts/car transactions and negotiations, as
well as other personal messages, only to the intended recipient. Do not just
press "reply" and send your email to everyone using the general '62-'65
Clubhouse public email address. This practice will protect your privacy,
reduce the total volume of mail and fine-tune the content signal to Mopar
topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion
Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. --
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. ---
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from
this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. For
more options, visit https://groups.google.com/d/optout. --
-- -- Please address private email -- email of interest to only one
person -- directly to that person. That is, email your parts/car transactions
and negotiations, as well as other personal messages, only to the intended
recipient. Do not just press "reply" and send your email to everyone using the
general '62-'65 Clubhouse public email address. This practice will protect
your privacy, reduce the total volume of mail and fine-tune the content signal
to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion
Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. --
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. ---
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from
this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. For
more options, visit https://groups.google.com/d/optout.
-- -- -- Please address
private email -- email of interest to only one person -- directly to that
person. That is, email your parts/car transactions and negotiations, as well as
other personal messages, only to the intended recipient. Do not just press
"reply" and send your email to everyone using the general '62-'65 Clubhouse
public email address. This practice will protect your privacy, reduce the total
volume of mail and fine-tune the content signal to Mopar topic.
Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html
and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. --
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. ---
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from this
group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. For
more options, visit https://groups.google.com/d/optout.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.
|
Back to the Home of the Forward Look Network
