Viewing a thread - Carb Linkage help

You are logged in as a guest. ( logon | register )

Carb Linkage help Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> Engine, Exhaust, Fuel and Ignition	Message format

Beltran

Posted 2012-11-21 3:53 PM (#348146)
Subject: Carb Linkage help

Expert

Posts: 1730
1000

Location: Michigan

I need some help with the linkage for the 55 Chrysler. I have converted it to a 56 Pushbutton but the meriade of parts is making it difficult to determine the ones I need to connect the carb to the 4bbl pivot linkage, then to the mount on the rear of the engine (left of the master cylinder) and then that to the gas pedal and kickdown linkage.

Any diagrams or pictures of your linkage setup would be appreciated!! The service manuals for 55 and 56 do not have these pictures for reference.

Shep

Posted 2012-11-21 8:27 PM (#348180 - in reply to #348146)
Subject: Re: Carb Linkage help

Expert

Posts: 3402
2000

Location: Chestertown, NY ( near Lake George)

I e-mailed pics of my 55 Chrysler linkage( Hemi) to someone a few months back, don't rememember who though. Found the e mail, was Mark Romanowski, car is stored away for now.

Beltran

Posted 2012-11-21 10:38 PM (#348196 - in reply to #348146)
Subject: Re: Carb Linkage help

Expert

Posts: 1730
1000

Location: Michigan

I have those shep but I can't see the parts that I needed. I did find the service guides on the Imperial site had the drawings. They helped a lot.

http://www.imperialclub.com/Repair/Lit/Master/099/Page16.htm

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)