The Forward Look Network | ||
| ||
57 Dodge Suburban, Source for steering parts? Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Technical Discussions -> Steering and Suspension | Message format |
jaded13640 |
| ||
Veteran Posts: 295 | 57 Dodge Suburban. The idler arm is bad and the left (I think) tie rod end on the drag link is hit. The end on the drag link is not removable. I don't know if you have to buy a whole drag link or of you send it somewhere and have a new end pressed in. Maybe it can be pressed in at home...again, I don't know. I haven't done any parts searching yet at the parts stores...that's usually a futile gesture. If anyone is aware of a good source for parts and has an answer on the drag link question, I'd be very grateful. Thanks, Wayne | ||
mstrug |
| ||
Expert 5K+ Posts: 6502 Location: Newark, Texas (Fort Worth) | There are some nos drag links that come up on ebay. Kanter sells the Chinese crap. I think all the new ones are Chinese. There is a rebuild kit out there, moog I think. Inner tie rod ends: same thing, expensive or Chinese junk and you have to buy a pair most of the time. Outer tie rod ends are out there by moog and trw etc. Someone else sells a whole Chinese kit on epay, I wouldn't get it. | ||
mstrug |
| ||
Expert 5K+ Posts: 6502 Location: Newark, Texas (Fort Worth) | Found on FB... Happy steering makes for a Happy 58 plymouth. Pretty cool bearing conversion made by TRW seems like the hot ticket for a worn out idler bushing. Part number 18564 TRW for anybody that wants to hunt down a kit. | ||
ronbo97 |
| ||
Expert Posts: 4043 Location: Connecticut | Try Andy Bernbaum (oldmoparts.com). Pretty sure they can help you out, and you can view their catalog online. Another option is to have yours rebuilt. I believe Rare Parts in Stockton, CA, provides that service. They may also have the rebuilt parts in stock. Ron | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | rare parts is a rip off, they just mark up Moog parts *500% | ||
uncltank |
| ||
Extreme Veteran Posts: 380 Location: Kennewick Wa | Hi Wayne, Where are you located. | ||
57chizler |
| ||
Expert Posts: 3778 Location: NorCal | IIRC, board member 1960fury has the idler arm conversions. | ||
ronbo97 |
| ||
Expert Posts: 4043 Location: Connecticut | mikes2nd - 2019-05-28 1:54 PM rare parts is a rip off, they just mark up Moog parts *500% For my 55 Desoto, they rebuilt my center link and supplied me with inner tie rods, which are both unobtanium. And pleasant to deal with. Ron | ||
mstrug |
| ||
Expert 5K+ Posts: 6502 Location: Newark, Texas (Fort Worth) | https://www.ebay.com/itm/1957-58-59-60-61-62-63-64-Dodge-Plymouth-Ch... 8/202691580233?epid=669218363&hash=item2f315c1149:g:R6wAAOSwEK9ULg~d&vxp=mtr | ||
uncltank |
| ||
Extreme Veteran Posts: 380 Location: Kennewick Wa | PM sent... | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |