The Forward Look Network | ||
| ||
59 Dodge CRL Dual Antennas Instalation Template / Instructions Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Technical Discussions -> Body, Glass, Interior and Trim | Message format |
Daniel 1959 |
| ||
Regular Posts: 57 Location: Switzerland | Hi, I was looking for a rear dual antenna installation template for my new dual antennas on my gorgeous looking CRL D-500. Could not find anything on the web yet. Does anybody have such a template or can give me the right measurements or good pictures of where to drill the holes ? Thanks everybody for support ! Dani | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | If you have the correct Antenna's , it not for the Faint hearted , as Holes are massive,, I done mine After repaint,,, (109.jpg) (110.jpg) (112.jpg) Attachments ---------------- 109.jpg (127KB - 234 downloads) 110.jpg (161KB - 212 downloads) 112.jpg (209KB - 215 downloads) | ||
Daniel 1959 |
| ||
Regular Posts: 57 Location: Switzerland | Yeah, thats exactly what I have. but where did you get that sheet of paper from ? with the exact location. If you still have it could you maybe scan it and send it to me. I will then be able to seize it on the computer to match the exact fit.. Thanks again Dani | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | Hi Dan,, Sent you a Email with Attachment , hopefully you can print off as Full A4 size to be correct,, Also use your Mirror on the template to locate the 2nd Stud hole.. As i have taken template off my Dodge Royal which is currently stripped and 2nd Stud fixing hole has been welded over.. Here is some PICs to help understand my Template Cheers Clive (1.jpg) (2.jpg) (3.jpg) (4.jpg) Attachments ---------------- 1.jpg (180KB - 222 downloads) 2.jpg (133KB - 211 downloads) 3.jpg (200KB - 211 downloads) 4.jpg (239KB - 211 downloads) | ||
sermey |
| ||
Expert Posts: 1220 Location: SWITZERLAND | Nice Clive! Why not post as attachment in real size a scanned A4 PDF-File? Then can print on a transparency usable for both sides. Many would be happy with. - SERGE - PS: My CAD-template is still not ready and based on a Convertible (?). Edited by sermey 2020-04-08 4:57 PM | ||
Lancer Mike |
| ||
Location: The Mile High City | Theres a factory template for those. I have one on this thread Looks like the template pictured on this thread works pretty well too. I'd guess it would be the same for 1957 - 1959 Dodge, maybe Plymouth too? Edited by Lancer Mike 2020-04-08 11:46 PM | ||
Daniel 1959 |
| ||
Regular Posts: 57 Location: Switzerland | I checked and scaled both sheets. The 57-58 template shows a different angle to the 59 and also closer position to the trunk opening. I doubt it will work. Maybe the posts then would be to close to the trunk door and not enough clearance is provided. I wonder if the geometric of the 57-58 models is the same, as for 59 models the rear fins have changed, as far as I know. Dani | ||
Lancer Mike |
| ||
Location: The Mile High City | Good to know! I always thought those decks were virtually identical.
| ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |