The Forward Look Network | ||
| ||
Reproduction 1960-64 full-size wagon gas tanks Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General Discussion | Message format |
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | Vans Auto has reproduction gas tanks for many cars and I asked if they planned to make them for 1960-64 wagons. They said no as they would need to make at least 300 of them. Are there 300 people out there needing one? I know I had a hard time finding one and almost resorted to buying a rusted out one to try and repair as I had no tank at all. | ||
Ev's62Chrysler |
| ||
Veteran Posts: 210 Location: Suwanee, GA | Not me. | ||
AceS |
| ||
Veteran Posts: 281 Location: WA/USA | Me | ||
SavoyPlaza |
| ||
Elite Veteran Posts: 1172 Location: Georgia | Count me in for a couple! Pete | ||
Space Trukin Wagon |
| ||
Extreme Veteran Posts: 429 Location: Ohio | I would be interested in at least one gas tank. Even to just have as a spare. A total of 300 minimum production unfortunately, seems like that maybe a difficult number to reach considering the number of wagons still around and not all of them will need a gas tank. | ||
jboymechanic |
| ||
Expert Posts: 2196 Location: Muskego, WI | I haven't pulled mine to determine yet, but I'd be willing to be it's shot. | ||
tberd62 |
| ||
Veteran Posts: 206 Location: California | Tell Vans that they could probably double the price of the tanks and they would sell. This would recoup their initial cost quickly. The price of their regular tanks are very reasonable. I don't need one now, but I'm certain one will be needed in the future, | ||
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | Supply and demand determine price. I lucked out in finding a used one at a reasonable price and would have paid a lot more if I had to. | ||
AceS |
| ||
Veteran Posts: 281 Location: WA/USA | FYI I have a 60 Dodge Wagon tank for sale in the classified section. | ||
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | Ok, check this out. Someone posted these pictures on Facebook showing a new 1960-64 tank. They stated it was 57-59 but they had pictures of two different tanks. The other one was a flat under floor one. I contacted the company and they said these are just samples. But samples lead to production. I'll talk to them more about it tomorrow. (moparpro1.jpg) (moparpro2.jpg) Attachments ---------------- moparpro1.jpg (135KB - 354 downloads) moparpro2.jpg (133KB - 356 downloads) | ||
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | And here's an interesting picture. The one with more ribs is a 1961 tank and the one with less is supposedly 1960 only. I had friends check their '61 and '64 wagons they had the more ribs. I was sold the one with the less ribs as a '61 Dodge tank so I'm not sure if there was a transition during the year. Edited by NicksGarage 2020-05-26 11:49 PM (6061tanks.jpg) Attachments ---------------- 6061tanks.jpg (187KB - 349 downloads) | ||
d500dodge59 |
| ||
Veteran Posts: 245 | if you have a sample look like that then you have the tool so just go on stamp them. | ||
jboymechanic |
| ||
Expert Posts: 2196 Location: Muskego, WI | Any more details on the supplier? Price? | ||
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | jboymechanic - 2020-05-27 6:55 PM Any more details on the supplier? Price? Nothing yet. | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | I know I could use 3. | ||
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | He says he has one in stock as pictured above. I don't know the price. You can contact Michael directly at Sales@moparpro.com. I have not seen this tank in person but from the picture it looks like it requires a grommet for the fuel filler pipe. This is how 1964 tanks were made. The '60-63 ones use an o-ring inside a raised opening. The fuel filler pipes all have the same part number for all 5 years. If someone here gets one, please reply back when you get it. (moparpro3.jpg) (moparpro4.jpg) (moparpro5.jpg) Attachments ---------------- moparpro3.jpg (79KB - 341 downloads) moparpro4.jpg (84KB - 348 downloads) moparpro5.jpg (77KB - 328 downloads) | ||
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | This is the '60-63 fill pipe opening. (fill_pipe3a.jpg) Attachments ---------------- fill_pipe3a.jpg (73KB - 348 downloads) | ||
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | I heard back from him. The price is $750. Production ones won't be available until March of 2021. Once again. I've not seen this tank in person. I have no connection to the company. | ||
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | Here's the ebay listing for the tank. I know the price is higher than people think it should be but there is a very limited market so the tooling cost can't be spread out as far as more common tanks. https://www.ebay.com/itm/184342599855 | ||
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | The tanks at Moparpro are sold out but production units are being made. He said they'd be available in the spring. (115954673_2633930666866439_4793131223743535191_n.jpg) (116010462_2633930686866437_4799929276829995993_n.jpg) Attachments ---------------- 115954673_2633930666866439_4793131223743535191_n.jpg (41KB - 258 downloads) 116010462_2633930686866437_4799929276829995993_n.jpg (46KB - 266 downloads) | ||
jboymechanic |
| ||
Expert Posts: 2196 Location: Muskego, WI | Thought I'd add that my tank from my 1960 wagon is of the "less ribs" design. For anyone looking for a new o-ring, it is standard size -329 (fractional size 2-3/8" OD, 2" ID, 0.200" cross section). I'm using McMaster-Carr part number 9452K48 which are 70 durometer Buna-N and they are $11.38 for a pack of 50! Or just search for o-ring size 329 and get the material you think would be most appropriate. | ||
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | The new gas tanks are now available either through the Mopar Pro site or for a cheaper price on Ebay right now. Note: I haven't seen these in person. They use a 1964 fuel filler pipe grommet instead of the o-ring used on 1960-63 models but the filler pipe is the same for all 5 years so that's not a problem. https://www.ebay.com/itm/1960-1961-CHRYSLER-STATION-WAGON-BRAND-NEW-... Mopar Pro site: http://www.moparpro.com/product/1960-1964-chrysler-dodge-plymouth-d... | ||
jboymechanic |
| ||
Expert Posts: 2196 Location: Muskego, WI | That ebay price is more reasonable, but still pretty expensive. However, it does appear to be a darn nice reproduction of the original. If my tank doesn't hold up, I'll go this route. | ||
jboymechanic |
| ||
Expert Posts: 2196 Location: Muskego, WI | I ended up buying a tank. I "watched" the listing on ebay and this morning I received an offer to buy the tank at $531.24, so I went ahead an did it. Now where do I find a 1964 pipe grommet? | ||
jboymechanic |
| ||
Expert Posts: 2196 Location: Muskego, WI | I should have my tank today yet according to tracking provided by ebay. I still need to find a grommet, anyone have a part number or a source? | ||
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | The grommet part number is 2203472 and is very common. Even available on Amazon. https://amzn.to/331W2OO | ||
jboymechanic |
| ||
Expert Posts: 2196 Location: Muskego, WI | Thank you for this Nick. I contacted the seller about my tank, he's on vacation so the tank hasn't actually shipped yet. For some reason, ebay shows it as shipped and arriving today? Anyway, I'll post pictures of the tank when it arrives. | ||
NicksGarage |
| ||
Expert Posts: 1223 Location: Ramona, CA | I ended up buying one of the Moparpro tanks as the factory one I put in started leaking. But I couldn't get the sending unit into the new tank. The flange where the sending unit is stamped wrong. See this discussion for details. http://www.forwardlook.net/forums/forums/thread-view.asp?tid=76788&... | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |