The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Factory Instructions for Adjusting a 12V "Jubilee" Horn.
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Electrical, Battery and ChargingMessage format
 
56D500boy
Posted 2019-09-17 7:05 PM (#587674)
Subject: Factory Instructions for Adjusting a 12V "Jubilee" Horn.



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
I just picked up a NOS 12V Jubilee horn that I am going to cannibalize to fix my 56 Dodge LO-JUB horn, as discussed in this thread (thank Nathan for the head's up BTW):

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=68724&...

Interestingly (to me), the eBay NOS horn (which BTW is the same diameter as my OE horn so parts swapping *should* work) came with adjustment instructions. Basically there are no adjustments. You're not supposed to play with the big adjustment screw and nut that were adjusted at the Jubilee (TM brand) factory but you can adjust the little screw as the points wear with time. OKAY. That might explain my issue with my original horn. It might be so far out of adjustment that it's FKd.

Here is the new horn, soon to be sacrificed for its parts and the instructions:





(eBayJubileeLO_1.jpg)



(eBayJubileeLO_2.jpg)



(eBayJubileeLO_3.jpg)



(JubileeHornInstalltionAndAdjustmentInstructions_Small.jpg)



Attachments
----------------
Attachments eBayJubileeLO_1.jpg (221KB - 254 downloads)
Attachments eBayJubileeLO_2.jpg (241KB - 244 downloads)
Attachments eBayJubileeLO_3.jpg (247KB - 255 downloads)
Attachments JubileeHornInstalltionAndAdjustmentInstructions_Small.jpg (171KB - 250 downloads)
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)