The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1957 '300' cam spec's
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
wayfarer
Posted 2023-08-03 10:07 AM (#631126)
Subject: 1957 '300' cam spec's



Elite Veteran

Posts: 888
500100100100252525
Location: Peoples Republic of Oregon		Does anyone have the full cam profile spec's....CamDoctor style details
Top of the page Bottom of the page
Powerflite
Posted 2023-08-03 11:20 AM (#631130 - in reply to #631126)
Subject: Re: 1957 '300' cam spec's



Expert 5K+

Posts: 9681
500020002000500100252525
Location: So. Cal		I just have the lift and duration as follows:
------------------Lift---------------Duration
-----------Intake-----Exhaust ---Int....Exh
57 NY: ....0.389.......0.389......252....252
300C: ....0.444........0.435......280....270
300D: ....0.435........0.442......276.....276
Top of the page Bottom of the page
Powerflite
Posted 2023-08-03 11:24 AM (#631131 - in reply to #631126)
Subject: Re: 1957 '300' cam spec's



Expert 5K+

Posts: 9681
500020002000500100252525
Location: So. Cal		But I don't recommend that anyone run a stock 300C cam profile. You are much better off using the Isky 270 cam, which is close, but with a better profile.

0.465 lift both, 270 duration both, 221 duration at 0.05 lift
Top of the page Bottom of the page
wayfarer
Posted 2023-08-03 2:31 PM (#631137 - in reply to #631126)
Subject: Re: 1957 '300' cam spec's



Elite Veteran

Posts: 888
500100100100252525
Location: Peoples Republic of Oregon		Yeah, from what I find it was pretty tame by todays standards. We have been looking at Crower 278FDP which is similar. Thanks
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)